Question 1

How to remove speed limit (de-restriction) for Kommoda

Accepted Answer

Due to safety and local law reason, we have limited the motor and speed to 250W and 15mph, if you would like the 750W with no speed limit, please follow the instruction video and text below:

'Unplug the speed limiting cable for Kommoda'
https://www.youtube.com/watch?v=XK4uUOwrTnw

Step 1:
Remove the bolt with Allen key screwdriver and take out the controller in the frame.

Step 2:
Unplug the speed limit cable:

Step 3:
Now you're able to enjoy the full speed of the bike.

Updated on: 28/07/2022

Aktualisiert am: 11/03/2024

Question 2

Cyrusher Trax Assembly Guide

Accepted Answer

Artikel über: Assembly Guide

Articles on: Assembly Guide

Ebike Assembly Guide

Ebike User Manual

1. Trax User Manual

Updated on: 17/02/2023

Aktualisiert am: 11/03/2024

Question 3

How to inflate the tire when it keeps popping off the rim

Accepted Answer

Artikel über: Toubleshooting

Articles on: Toubleshooting

This article is dedicated to solving the problem when you inflate the tire and it just keeps popping off the rim.

Step 1:
Inflate the tire and keep watching the status of it, when you see it slightly pop off the rim, stop inflating.

Step 2:
Push the edge of the tire to position, well situated in the rim.

Step 3:
Inflate the tire again.

We have a detailed video showing the whole process:

'How to inflate outter tube'
https://drive.google.com/file/d/1GKkot-dV2OwcXQ47VLT-X79FkcAD3gRQ/view?usp=sharing

Updated on: 20/07/2022

Aktualisiert am: 11/03/2024

Question 4

How to solve your brakes squeal or make a grinding noise

Accepted Answer

Articles on: Toubleshooting

This article is dedicated to showing you how to solve the problem when your bike's brakes squeal or make a grinding noise.

To solve the problem, we need to check the brake pads and adjust the rotor and some screws, please see this video for detail:
https://www.youtube.com/watch?v=Qbj95kLpOZs

Updated on: 03/08/2022

Question 5

Cyrusher XF770 Assembly Guide

Accepted Answer

Articles on: Assembly Guide

Thank you for choosing the Cyrusher XF770 and welcome to the Cyrusher Family!

You can connect with other Cyrusher Owners in our Facebook Group here: https://www.facebook.com/groups/cyrusherowners

XF770 is similar version to XF690, so can apply to the this assembling Instruction of Cyrusher XF690 to Cyrusher XF770 too.

XF770 Assembling Instruction Manual

Updated on: 07/03/2023

Question 6

Error Code 10 - How to identify the problem when there's E10 code on your bike computer

Accepted Answer

Articles on: Toubleshooting

This article is dedicated to identifying the problems when you encounter the error code 10 situation.
Here's what it is like to have an error code 10 on the bike computer:

Please take the following diagnosis step to identify the problem, whether it's a sensor or controller, or motor issue, the steps have been proved a success in multiple cases.

Diagnosis Step:

Remove the crankarm and pull out the PAS sensor
First, we need to check all the cable connections are tight and OK, and then remove the crankarm in order to pull out the PAS cadence sensor

'Crank Arm And PAS Sensor Removal For All Cyrusher Models':
https://www.youtube.com/watch?v=KZKj8auQbh4&t=1s

Try use the throttle to start the motor.
After pulling out the sensor, try to use the throttle to start the bike, if the bike cannot be activated and error code 10 still exists, then we need to change a new controller (please contact Cyrusher support for a new controller replacement)

'Cyrusher XF650/XF900 Controller Replacement'
https://www.youtube.com/watch?v=IR8kElLJ-3s

Change the motor if a new controller cannot fix the problem.
If changing the controller still cannot solve

Artículos frecuentemente leídos

Ver todas las categorías